Air-gapped video surveillance

Cameras, recording and AI with no route to the internet.

OpenNVR records, streams and runs AI on hardware you own, and every part of it works with the network cable to the outside world unplugged. No account, no licence server, no cloud model. When you do open a door, it is one you chose, and it is in the audit log.

What runs with no network

Recording, live view, playback, export

Footage is written in one-minute chunks on your storage, whatever the AI is doing. Nothing about recording needs a network beyond the cameras.

AI models

Detection, plates, faces, pose, captions and search run as containers on the same box. Under the default local_only policy, a model that declares network access is refused registration.

Apps

Intrusion, loitering, occupancy, plates, gate control and the rest run beside the models. Each app reaches only the hosts it declared, through an egress proxy an administrator approves.

The camera agent

Ask your cameras questions by voice or text. The language model runs on the host, so the conversation never leaves the building either.

The evidence pack

One read-only command answers the questions an auditor asks and writes them into a hashed zip, with no service to call home to.

Two default-deny gates

DEPLOYMENT_MODE=offline and AI_SOVEREIGNTY=local_only refuse every cloud route and every non-local model until an operator opts in. Opting in is audited.

How an air-gapped install arrives

Images arrive on media. Catalog app images are pinned to exact digests and their signatures checked before the media is cut, because the signature log is out of reach once the site is sealed. Then the installer sets up the box, and the site runs with the signature check off, set knowingly and logged at every start.

The reference appliance documents the hardware and the dual-NIC layout, and the enterprise guide how we hand a site over: hardening checklist complete, first evidence pack all-pass.

Sealed or connected: two modes, the same camera isolation

With two network cards, the cameras live on one and people on the other. Whether that second side reaches the internet is your choice, and choosing it does not open the camera network.

Sealed

Neither network card reaches the internet. Updates arrive on media, operators sit on site, and alerts go to screens and phones on the local network.

Connected uplink

The management side reaches the internet: remote viewing over your VPN, alerts to phones anywhere, updates pulled through the egress proxy, and any cloud model you choose to allow.

The same in both modes

  • The cameras have no gateway, and the firewall rule the installer offers stops the box forwarding their traffic, so they reach nothing beyond OpenNVR.
  • The web interface listens only on the management card; a camera cannot even reach the login page.
  • Cloud routes and networked models stay refused until an operator opts in, and opting in is written to the audit log.
  • Apps reach only the hosts they declared, through the egress proxy.
  • Roles, MFA, the audit log and model fingerprints work exactly as they do offline.

What connecting adds

Online, the OpenNVR box is the one thing on site the internet can see. Keep it behind your firewall, reach it over a VPN, never port-forward it, and keep MFA on and updates current.

The forwarding rule is applied when you accept it at install, and leaving the camera card without a gateway is part of setting the network up; an automatic check that the two networks never overlap is planned.

How camera network isolation works →
Security beyond offline

Air-gapped is not enough.

"Our cameras are offline, so nothing can reach them" closes one door. Most breaches of isolated systems came through the others: a USB stick, a maintenance laptop, an insider, a compromised device, an update that was not what it claimed — around a quarter of OT incidents start with removable media and contractor laptops. OpenNVR is built for all of them.

What still gets inWhat OpenNVR does about it
A USB stick or a contractor's laptopStuxnet and Agent.btz both crossed air gaps this way.Per-camera roles and MFA, and an append-only audit log of who did what, from which session.
Someone already insideAn insider needs no network path at all.Viewers look, operators arm, admins govern — enforced on every surface, including the live event stream and the agent's tools.
Camera firmware you cannot trustUnpatched CVEs, covered-list vendors, hidden cloud agents.Cameras on their own network with no gateway, re-streamed over TLS; covered vendors flagged in the inventory; alerts from Suricata on the host streamed live into the UI.
A tampered or swapped AI modelPoisoned weights behave normally until a trigger appears.Every model's weights are fingerprinted, re-checked every minute, and recorded against every inference they make.
An update that is not what it claimsAir-gapped sites still install software from media.Catalog apps are pinned to an exact digest and signed by the CI that built them; the installer refuses one that does not verify. Signed platform releases are on the roadmap.
An app that phones homeOne plug-in with network access undoes the air gap.Each app has its own credential and reaches only the hosts it declared; a model that declares network access is refused under the default policy.

model fingerprinting

You can prove which model made every decision.

Every AI model registers with the SHA-256 of its weights. OpenNVR re-checks it every minute: a changed fingerprint is written to the audit log, and a model that suddenly asks for new permissions stops serving until an operator approves it again. Every alert carries a correlation ID back to the model and the exact weights that produced it.

What a hash cannot do: prove the weights were clean when you approved them. That is why models declare what they may touch, run under a default-deny network policy, and can be fine-tuned on your own footage instead of downloaded.

dual-NIC isolation

OpenNVR online, cameras never.

camera networkno gateway · no internetcameracameracameraOpenNVRrecords · AI · appsNIC 1NIC 2management networkoperatorsphone appSIEM · NASupdates, alertssealed, or via your firewall

Two network cards. The cameras sit on their own network, set up with no gateway, no DNS and no route out. Operators, the phone app, alerts and updates reach OpenNVR on the second card.

Sealed or connected — your choice. The second card can stay offline too, or reach the internet for remote viewing, phone alerts and updates. Connecting it is a mode, not a downgrade: the camera side stays exactly as dark as on a sealed site, and every protection on this page stays on.

Online, the one thing the internet can see is the OpenNVR box, so keep it behind your firewall, reach it over a VPN and never port-forward it. The installer's dual-NIC mode binds the web interface to the second card and offers a firewall rule that stops the box forwarding between the two. How camera network isolation works.

Tested from outside. Independent researchers have reported issues; each was fixed and credited by name, and researchers are welcome to look further. The architecture is a published, peer-citable paper.

Covered-list cameras: replace the recorder first

If your site runs cameras from vendors restricted under NDAA §889, no network design makes them compliant; they have to be replaced. What OpenNVR changes is the order: replace the recorder first, keep the covered cameras sealed off while they remain, and swap them on your budget.

  1. 01

    Find

    The built-in security check flags covered-list cameras in your inventory. OpenNVR Scout is the formal assessment, with OEM-rebrand resolution and a signed report.

  2. 02

    Isolate

    Move the cameras to their own network with no gateway, behind OpenNVR's first network card. Operators and updates reach OpenNVR on the second.

  3. 03

    Replace

    Covered cameras still have to go: NDAA §889 is about the manufacturer, not the network. Replace them on your schedule; OpenNVR records the compliant cameras that take their place.

Tell us about the site

Cameras, retention, the AI you need and how the site is sealed. We will say what runs on which hardware, what we would install, and when a community install is all you need.