The things that are supposed to happen on your site, checked by the cameras already there.
A perimeter that arms itself after the last shift. Someone who stays too long at the door. A bag with nobody near it. A visitor who walked in without being screened. Four apps watch for these on the cameras you have, and every alert arrives with the picture that proves it.
Four apps, one click each
Perimeter alarm after hours
Draw the zone, arm it on a schedule, around the clock or by hand, and a person in it goes to alarm with exit and entry delays like an intrusion panel. Operators arm, disarm, bypass and acknowledge from the Perimeter page, and the fence line can be made instant.
Where: The yard behind the shutter, the plant room, the roof, the bay that should be empty after the last shift.
The app →Someone who stays too long
A person or vehicle in a zone past a dwell threshold raises an alert, then an escalation if they remain. After-hours thresholds are shorter, a gathering of several people is its own alert, and the Loitering page shows who is dwelling now and the last week by the day.
Where: The ATM vestibule, the fire exit, the loading bay, the forecourt, the stairwell.
The app →A bag with nobody near it
The app follows each item: with its owner, unattended once nobody is near it, abandoned after a set time, escalated, or reclaimed. The clock starts only when the owner has walked away, which removes most false alarms. A bin or a planter is marked as a fixture once and stops alerting.
Where: The concourse, the platform edge, the aisle, the box against the fire door.
The app →Was everyone actually screened?
At a door where every visitor is wanded, the app rules on each screening from the guard's and the visitor's movements: scanned on every surface, missed surfaces, or not screened at all, plus the scanner's own red flag. Every alert carries the visitor's and the guard's photographs. The Entry Screening page shows the compliance rate, the trend and the per-guard breakdown, with clips, a print sheet and CSV export: complete scans over all screenings, not a count of complaints.
Where: A jewellery showroom, a bank branch, a courthouse door, a venue entrance.
The app →Each app has a page of its own in OpenNVR: the live state, the controls, the history, and the settings, with zones drawn on each camera's own frame. Install from the App Catalog, pick the cameras, draw the zone.
What a safety manager needs from an alert
Every alert carries its evidence
The snapshot, the camera, the zone, the seconds involved, the tracks, and the fingerprint of the model that decided. An alert is something you can act on, not a line in a log.
Alerts reach a phone
The Alert Notifier sends to Telegram, Slack, Microsoft Teams, ntfy, Pushover, Discord, Matrix, email and any webhook, with rules for who gets what, quiet hours, and grouping so a burst is one message, not fifty.
No new cameras, no GPU
All four apps run on the detections the always-on detector already produces from the cameras you have. A mini-PC covers a site; the heavy models are not involved.
A record for the audit
Every arm, disarm, bypass and acknowledgement is in the audit log with who did it. The Entry Screening report and the dwell history export to CSV.
Who runs it
Retail and showrooms
Entry screening with a record, loitering at the door, a bag left on the floor.
Industrial sites and warehouses
The perimeter armed after the last shift, the loading bay watched, the yard behind the shutter.
Transport and venues
Unattended items on a concourse, gatherings on a platform, the exit that should stay clear.
Banks and critical sites
The ATM vestibule after hours, the plant room, and an audit trail a regulator accepts.
What is not here yet
Hard hats, vests and masks (PPE compliance), fire and smoke, and proximity to moving machinery are the apps this market asks for next, and they are on the build-this-next list. The model half of PPE is closer than it was: the open-vocabulary detector answers "person wearing a hard hat" on a frame today with nothing to train; the app that watches a zone with it is the part not written. If your site needs one, tell us and we will say what it takes.
Everything runs on your hardware. Footage of your staff never leaves the site, retention is yours to set, and the Alert Notifier's routing decides who sees what.
Start with the door or the fence
Install OpenNVR, add one camera, install Intrusion Detection or Loitering Detection from the App Catalog, draw a zone and set the hours. The first alert arrives with its photo.