Keep your cameras. Upgrade what they can do.
OpenNVR is an open-source recorder that adds AI to the cameras a site already has. Plate reading, intrusion alerts, occupancy and footage search install as apps, on a box you own, and the next capability is another install rather than another round of cameras.
What it does for a site
Vehicles and gates
Read number plates on the cameras you pick, keep allow and deny lists, alert on overstays, and open the barrier for an allowed plate.
Vehicles and gates →Perimeter and after-hours
Draw a zone on the camera's own picture and set the hours. Intrusion, loitering, line crossing and camera tamper each raise an alert with the picture that caused it.
Intrusion Detection →People and safety
Count a room against its limit, check protective equipment at an entrance, and check that a guard screens every person the same way.
Workplace safety →Finding the moment
Type or say what you are looking for and get the visits that match, across every camera. Alerts above your bar go to a phone through Telegram or any webhook.
Footage Search →These are apps from the App Catalog, installed with one click. Each runs only on the cameras you pick for it.
Why not buy cameras with AI built in?
Because an AI camera is as smart as the day you bought it. Its models are fixed to the chip and firmware it shipped with; when they date, the upgrade is a new camera. OpenNVR keeps the intelligence on a box you control, so the cameras only need to send video.
Upgrade any time
A camera with AI inside runs the models its chip and firmware shipped with. Here a new model or app is an install, on the cameras already on the wall.
Switch freely
Change the plate reader, the detector or the vision model without touching the cameras, the recordings or the apps built on them.
You hold the keys
Footage, models, security settings and the audit trail stay on a box you own. It runs with no internet connection if the site requires that.
What it runs on
Ordinary hardware you can buy anywhere, with any ONVIF or RTSP camera. Three reference sizes, each with detection running on every camera:
| Size | Cameras | The box | Memory | Recording disk |
|---|---|---|---|---|
| Small | Up to 8 cameras | Raspberry Pi 5 (8 GB) or an Intel N100 mini PC | 8 GB | 1 to 2 TB |
| Medium | Up to 32 cameras | 8-core PC with integrated graphics (Intel Core i5/i7 12th gen or later, AMD Ryzen 5/7) | 32 GB | 8 to 16 TB, mirrored |
| Large | Up to 96 cameras per node | 16-core server with an NVIDIA GPU (8 GB or more) for plates, faces and vision models | 64 GB or more | 32 TB or more |
As a guide to disk size, one 1080p H.265 camera recording continuously uses about 0.65 TB in 30 days. The full sizing, network layout and hardening checklist are in the reference appliance guide. Send us the site's shape and we will say which size fits.
What it costs
Running it at your own site
Free
The complete platform, every app and every adapter, under the AGPL. No account and no licence server.
Having it supported
Subscription
Response times, certified builds, upgrade guidance and security advisories for teams that run it in production.
Selling it under your own brand
From USD 15 per camera, one time
The commercial licence, for companies that ship OpenNVR to their customers as part of a product. A pilot of up to 32 cameras is free for 90 days.
Every figure, the volume tiers and the licence terms are on the pricing page.
One app, as an example: screening at the door
A site that screens people at its entrance with a handheld scanner has a rule that is easy to state and hard to check: every person, the same way, every time. Guard Scan Compliance watches the entrance camera and checks each screening from the guard's and the visitor's body positions: left arm, right arm, front, back. It keeps a record of every screening and flags the ones that were incomplete and the ones where the scanner found something.
It is a catalog app like the others, built on the same SDK anyone can use. A rule this specific to one kind of site is the reason the platform is open: if your site has a rule nobody sells a camera for, it can be an app.
Guard Scan Compliance →Who installs and supports it
Your own IT team or your installer can: it is two commands on a machine with Docker, and the installer asks its questions in plain words. Updates install by themselves, are backed up first and roll back if the new version is not healthy.
The team that built the platform also supports it and builds on it for hire: a support subscription for sites in production, and custom apps or models fine-tuned on your own footage as scoped work. Installers and integrators who want to offer OpenNVR to their own customers should read the partners page.
Start with one site
Tell us how many cameras, which brands, and what you want them to do. We will say what it takes, including when the free edition and your own installer are all you need.