Home

A doorbell that knows the family. A porch that knows the parcel is gone. No subscription.

OpenNVR is an open-source recorder with AI on a box in your house: the cameras you already have, faces you enrol yourself, parcels counted on the porch, and all of it in Home Assistant. No account, no monthly fee, and nothing about your home sent anywhere.

What you get, and what you don't have to give

No account, no subscription, no cloud

The recorder, the models and the faces live on a box in your house. Nothing leaves it unless you set up something that does, and that is audited.

The cameras you have, or a phone

Any ONVIF or RTSP camera, including the cheap ones, kept on their own network. No camera? The OpenNVR Cam app turns an Android phone into one.

Runs on what you have

A Raspberry Pi 5, an Intel N100 box or an old laptop records and runs the doorbell and the porch. A GPU adds the voice agent and scene descriptions.

Ask it out loud

The camera agent answers in plain language: who was at the door this morning, whether the parcel is still there, what happened in the garden overnight. On your hardware, with no microphone audio leaving the house.

The door, the porch, and the house

A doorbell that knows the family

Enrol faces from a photo, a snapshot at the door or the browser's own camera, several photos per person. Family, friends, staff and the people you would rather know about each get their own category, severity and chime tone, with quiet hours. Strangers go on a wall you can enrol from later. Every visit is kept, with the name on it.

People →

Is my parcel still there?

The app counts parcels on the porch after someone leaves, so a count going up is a delivery and a count going down is a pick-up. It then decides whether that was you, the courier correcting a mistake, or someone who followed the van, and says why. Delivered, collected and taken each have their own alert, with before-and-after photos.

Deliveries →

In Home Assistant, with nothing to install

Turn on MQTT discovery and every camera, zone and app appears in Home Assistant as a device: motion, detection and recording switches, who was at the door, how many parcels are waiting. A person at the door after dark turns the porch light on, as an automation you write once.

Home Assistant →

An evening's work

  1. 01

    Install

    Two commands on the box. No account to create.

  2. 02

    Add the door camera

    Find it on the network or paste its stream address.

  3. 03

    Install Smart Doorbell

    From the App Catalog, pick the door camera, enrol the family on the People page.

  4. 04

    Connect Home Assistant

    Settings → Integrations → MQTT, discovery on. The devices appear in seconds.

Where it stands against the alternatives

If Home Assistant is your control plane and a detector with a polished Coral setup is all you need, Frigate is a fine choice, and we say so. OpenNVR is for the house that wants more than detections: faces with names, a porch that reasons about who took the parcel, a recorder with per-camera permissions for the family, and an agent you can ask. Hardware-accelerator support (Coral, Hailo) is still thinner than Frigate's; a Pi 5 or an N100 runs the doorbell and the porch without one.

Faces are personal data, including your family's. They are enrolled by you, stored on your box, and deleted by you. Nothing is sent to a vendor to be recognised.

Start with the front door

Docker is the only requirement. First run takes 8–15 minutes, almost all of it downloading images.